冷却塔部件 and Components for Wet and Dry Systems
Improving Cooling System Performance, Efficiency & 可靠性
自1936年以来，B&W 365体育nba在线直播 has engineered, 安装, upgraded and serviced an extensive range of turnkey cooling systems.
除了 to providing cooling tower pars, 我们广泛的能力包括基本的技术援助和现场服务支持以及安装, commissioning and start up, performance testing and optimization, including recommendations for upgrades, energy savings and wet-dry conversions.
一个专门的, 多学科的售后团队致力于按照各种国际工程标准成功执行项目. 在工厂运行期间，我们成功地完成了许多设备升级项目, reducing or eliminating downtime.
- Wet, dry and hybrid cooling system solutions
- Wet-to-dry system conversions
- Maintenance, overhaul and upgrades
- Cooling tower parts, components and field service
- Cooling system inspections
- 在线监测
- R&D测试
- Operational and 维护 培训
Download our available brochures:
Wet 冷却塔部件 and Components Brochure (PDF)
美籍西班牙人湿 冷却塔部件
As a leading worldwide supplier of SPIG™ cooling system solutions, we provide comprehensive after-sales services including operational support, 维护, 培训, upgrades and replacement parts.
我们的冷却塔部件和替换部件是可靠的，并经过验证，以保持您的设备运行在最佳效率水平, regardless of original manufacturer. 高质量的组件可从全球服务网点快速交付，为您提供连续和安全的工厂运行.
电影充满
SPIG湿式冷却系统充膜将分布喷嘴产生的水滴形成薄膜，通过产生大面积的有效传热和蒸发，实现高效冷却.
我们采用优质材料，帮助延长冷却塔的使用寿命，减少部件更换频率.
In applications with particularly dirty process water, 我们开发了SPIG LC填充型，以实现高热性能和含有大量污染物的水之间的最佳折衷.
注:
- Standard temperature range is –20C to 55C for PVC and –20C to 70C for PP.
- 在原料中加入特殊添加剂，最低温度可低至- 40℃.
- 在原料中加入特殊添加剂，PVC的最高温度可达70℃，PP的最高温度可达80℃.
- PP can be provided with fire-retardant properties as per ASTM E84 FI<25 or in accordance with CTI 136 Code.
Film Fill Protection Device
我们的薄膜填充保护装置设计用于在水中含有高水平污染物(如沙子或碎屑)的应用中防止喷嘴和薄膜填充上层的损坏. This device is composed of PVC-extruded pipes and PP spacers to be assembled onsite, and positioned on the upper surface of film fill. It is available in varying lengths to fit into any cooling tower dimension.
溅满
我们提供广泛的SPIG飞溅填充组件，通过最大化水/空气接触来促进传热能力. 我们广泛的飞溅填充组件是基于丰富的现场经验开发的, particularly with water which is prone to clogging, such as sea and geothermal water.
注:
- Standard temperature range is –20C to 55C for PVC and –20C to 70C for PP.
- 在原料中加入特殊添加剂，最低温度可低至- 40℃.
- 在原料中加入特殊添加剂，PVC的最高温度可达70℃，PP的最高温度可达80℃.
- PP can be provided with fire-retardant properties as per ASTM E84 FI<25 or in accordance with CTI 136 Code.
分布喷嘴
有效设计的分配喷嘴有助于确保水在填充物上的均匀输送. SPIG ECOJET和NEW STATIC分布喷嘴是在经过广泛和成功的性能测试后开发的，并在许多安装中得到了验证.
Our ECOJET and NEW STATIC distribution nozzles provide versatility, high reliability and outstanding performance, 并且可以按照UL-94标准用V2制造自熄性能.
芯材料
Installed above the distribution level, 漂移消除器起着重要的作用，它能捕获被困在气流中的水滴，否则这些水滴就会流失到大气中. 目前的SPIG消漂器设计是经过多年的现场应用和性能测试而开发和完善的.
注:
- 通过在原料中加入特殊添加剂，最低温度可低至- 40℃.
- For PP, maximum operating temperature is 80C.
- 消除漂移器的效率是基于恒定的空气速度，并假设按照制造商的规格安装漂移板.
- 可根据要求提供具有自熄特性的PP元件.
降噪系统
典型的降噪装置是在进气口和/或风扇堆顶部的挡板, mechanical equipment coffins, and low-noise cladding made from FRP. 除了, 我们的冲击衰减波(IA-Wave)噪声衰减系统可以安装，以减少水从填充物落到盆地水中产生的高频噪声. 该系统由特殊的倾斜剖面组成，间距适当，以便快速排水. 该系统由高质量的pvc挤压元件组成，并由PP垫片填充，安装在水池的水位上方, 典型的FRP梁.
进风口百叶
进风口百叶可用于减少碎片进入冷却塔进风口盆的可能性. 该装置还有助于避免阳光直射盆地水造成的藻类和细菌繁殖的风险. Constructed with PVC light gray thermoformed panels in a standard width of 65 mm, 我们还可以定制面板尺寸，以适应大多数冷却塔应用和玻璃钢支撑元件.
多行包
对于混合式冷却塔，我们可以提供多排束结构的热交换器. 我们的控制铝翅片工艺适用于G或L翅片配置与不同的FPI和管道直径从1英寸. 到2英寸以上. This provides the flexibility for a wide range of applications.
风扇栈
通过可靠的合作伙伴使用SPIG专有模具，可以提供广泛的风扇堆直径和高度. Flanged fan stack connections are typical, but an overlapped design can also be supplied when requested. Typical material is standard polyester resin or fire-retardant FRP with FSI<25 as per ASTM codes.
其他配件
我们还开发了许多其他专用组件，以方便安装或降低运输成本, such as spacers for FRP structures and sleeves, 玻璃钢主柱支撑, 洗手盆垫片. 我们还可以提供:
- All mechanical components for electric motors, gear boxes, driving shafts and fans
- Backstop devices, lubrication systems, and sensors to monitor mechanical components
- Firewalls to prevent fire propagation between cells
- Ladders, platforms and stair cases
- UNICO cooling tower remote monitoring system
- FRP risers to feed water in each cell, valves
- Vacuum systems, dampers and mixing devices for dry section of hybrid cooling towers
- 消防系统
- Cleaning system for heat exchangers